150L Hypothermia Biological Incubator
150L Hypothermia Biological Incubator

150L Hypothermia Biological Incubator

Brand:NANBEI

Model:BI-150A

Application:

product details

150L Hypothermia Biological Incubator

1. Airduct structure   

It applies circular airflow design concept and forced convection simulated air circulation principle. The large power air circulating blades designed specially can produce higher air flow rate and guarantee high even and stable inner bag temperature.

2. Test hole      

One test hole with the diameter of 45mm made with special mould is arranged on the left and right of the incubator respectively for observation. Internal silica gel soft plugs are provided to make sure the temperature inside the incubator is not affected.

3. RS232 interface

It is a special interface for PC. One software CD (suitable for simplified Chinese WINDOWS2000 or simplified Chinese WINDOWS XP operating system) is attached. Test program is written, monitored and saved with special PC software. Test data is directly displayed and printed with special PC software.

4. Environmental protection refrigerating   

International famous brand refrigerant compressor and Germany EBM condenser applying 134a refrigerant and featuring fluorine free, environmental protection, precision and high efficiency are applied.

5. Movable partition   

The partition height can be adjusted according to demand to be more humanized.

6. Effective heating   

It applies fin type heating, which makes the heating and heat dispersion faster. The temperature can be controlled precisely and effectively to reduce the overshoot in heating.

Application scope: This is a kind of constant temperature equipment used for environmental test, constant temperature test and low temperature storage etc.

1-14020Q154060-L.jpg

Features 

◆ The incubator applies high quality cold rolling plate, which is sprayed with special Dupont powder. The inner bag applies SUS304 stainless plate.

◆ The heat insulating material of incubator applies Germany Bayer freon-free polyurethane one-time foaming technology to improve the insulating property and reduce energy consumption. It can save over 30% energy in comparison with similar products. The overall strength of incubator is good.

◆ The parts are imported from foreign countries (special electric motor, truckle, control system, sensor…etc.). Independent temperature controller and creepage protector are provided to guarantee the safety.

◆ Unique airduct structure and perfect configurations can guarantee the evenness, fluctuation of product, velocity of temperature rise and drop, fully circulate the air inside incubator and effectively guarantee the evenness of temperature.

◆ RS232 communication interface is provided. One 45mm test hole made with special mould is arranged on the left and right respectively for the convenience of observation.

◆ The most advanced fuzzy PID intelligent programmable temperature control system is provided.

◆ Intelligent programmable mode, over temperature protection function, creepage protection, door open alarm, current failure alarm and sensor alarm etc. are provided to improve the safety. Meanwhile, functions including automatic start, stop, timed operation, clock display and self recover after energization are provided.

hypothermia biological incubator

Parameters

Model

BI-80A

BI-150A

BI-250A

Control method

Balance type

Temperature range

  -10℃~+65℃ (-40℃~+65℃ is optional)

Temperature display accuracy

0.1℃

Temperature control accuracy

±0.1℃(45℃)

Temperature evenness

±1℃(45℃)

Working room temperature

5~35℃

Overall dimension (mm)

W525*D607*H1100

W625*D657*H1270

W705*D747*H1500

Inner dimension (mm)

W400*D400*H500

W500*D450*H670

W580*D540*H800

Weight

About 87.5KG

About 95.5KG

About 117KG

Effective volume

80L

150L

250L

Temperature control method

Fuzzy logistic PID control method

Defrosting method

Compulsory/manual (optional)

Power voltage

AC-220V 50/60HZ

Programmed control

Common mode/programmed mode

Refrigerating power

123W

175W

222W

Heating power

550W

750W

1000W

Test hole

Double test holes on the left and right

Tray (standard configuration)

Two layers

Three layers

Three layers

■Performance parameter test under empty load: Ambient temperature of 20℃, ambient humidity of 50%RH.

■The change of product appearance and parameter will not be notified additionally. Product appearance may deviate due to shooting and printing reasons.

   

low temperature incubator
 

Send your message to us: